1. LOWER THE THERMOSTAT
Though many manufacturers set their water heater thermostats at
140°F, most typical households are comfortable with 120°F. Try taking a
shower after you’ve made the adjustment; it’s unlikely you will notice a
substantial difference in the temperature. Not only does this small
decrease cut costs, it also reduces scalding and slows mineral buildup
and corrosion in your heater and pipes.
2. INSULATE TANK
Insulating your storage tank (whether it’s electric, natural gas or
oil) helps to reduce heat loss and prevents the unit from turning on as
frequently. Be careful to follow the manufacturer’s recommendations
which include
not covering the heater’s thermostat, burner, and the top and bottom. Call your
local plumber for assistance in insulating your hot water tank.
3. INSTALL HEAT TRAPS
Heat traps allow the flow of cold water into the tank, but prevent heated water and unwanted
convection
to flow from the unit. Most modern water heaters are designed with
built-in heat traps. But if your unit is more than 10 years old (and in
good condition), installing a heat trap is a viable option. Ask your
professional plumber for more information.
4. USE COLD WATER
While this may seem like an obvious tip, using cold water for most
laundry loads (especially during the rinse cycle) and for basic grooming
(brushing teeth, washing hands, etc.) will go a long way in helping cut
down your utility bill.
5. REPAIR LEAKY FAUCETS
A leaky faucet may seem like a minor nuisance, but it can waste water
and money in a very short period of time. Repair any leaky faucet
immediately (be sure to check the outdoor faucets as well). Did you know
that 10% of homes have plumbing leaks that waste over 90 gallons a day (
epa.gov)!
6. DRAIN THE TANK
It’s a good practice to drain your water heater every year or so.
Draining the tank helps to remove sediment that can impede heat transfer
and ultimately lower the efficiency of the unit. While this is a
relatively easy procedure, always make sure to follow the manufacturer’s
directions. If in doubt, call a professional to help with water heater maintenance
.
7. INSTALL A TIMER
A traditional water heater tank is always running, which is a waste
of electricity. Installing a timer to turn off your heater at night is a
great way to help conserve energy – and could add years to the life of
the unit. Call your local plumber
for more information on water heater timers.
8. INSULATE PIPES
In addition to insulating the tank itself, consider adding insulation
to the first 6 feet of both the hot and cold water pipes connected to
the unit. This will prevent fire hazards and help conserve heat so that
your system doesn’t have to work so hard to reheat it.
9. REPLACE OLD APPLIANCES
If your dishwasher
or washing machine
is more than 10 years old, you might consider replacing it with a new,
more energy-efficient model. There are many new designs on the market
(including ENERGY STAR® models) that use less water and are much more
efficient than what was on the market even a decade ago.
10. CONSIDER PURCHASING A NEW WATER HEATER
It’s a good idea to replace your water heater if
it is more than 10 years old. An old water heater is not only
inefficient but could also cause irreparable damage if it leaks or
bursts.
Tel :
(832) 510-6972
Link :
https://txsugarlandwaterheater.com/
